ZHEJIANG SINGI ELECTRICAL LLC
ZHEJIANG SINGI ELECTRICAL LLC We think what you thought
Add to Cart
IEC Standards Lightning surge protector SPD , transient voltage surge suppressor TVSS
Product Description
| em | DC SURGE PROTECTIVE DEVICE | |||
| Code | FSP-D40 | |||
| Pole | 2P | 3P | ||
| Voltage | 500VDC,600VDC | 800VDC,900VDC,1000VDC | ||
| In(8/20)us(KA) | 20KA | |||
| Imax(8/20)us(KA) | 40KA | |||
| Standard | IEC/EN61643 | |||
| Type | II | |||
| Characteristic Curve | B,C,D | |||
| Working Temperature | “-5°”to +40° | |||
| Protection Degree | IP20 | |||
| Electrical life | More than 8000times | |||
| Mechanical life | More than 2000times | |||
| Dimension(W)X(H)X(D) | 36x90x68 | 54x90x68 | ||
| Installation | 35MM DIN RAIL | |||
| Accessory | Remote signal | |||
| Installation Altitude | ≤2000M | |||
Installation instructions
1. You must cut off the power supply before installation, live line work is strictly prohibited.
2. In protecting front line fuse or automatic circuit breaker.
3. Protector for the parallel installation, Kevin connection is recommended (for Kevin wiring convenience, operates two terminals on the module, which is a straight up. Kevin v-like connection is a connection. A contact point and the two lines in parallel, one into, a calculated). Connector requires solid and reliable, and short, thick and straight.
4. When installed according to the installation diagram shows the connection, where l (L1, L2, L3) for the line, n is neutral, PE ground wire, do not mistake. After the installation is complete, check that the protection unit is plug in place, close the automatic circuit breaker (fuse) switch, check the working status is normal.
5. Protector in use during the fault display window should periodically verify and view state when red fault display window or remote Terminal outputs alarm signals, the protector fails, should be repaired or replaced in a timely manner.
If there is any technical problem or product question, please feel free to contact us!
1. Send your inquiry to singi33@singi.com.cn
2. You can call us by:+86-13506553751
3. Online Skype contactor: singi68@singi.com.cn